GNSS and LiDAR in one system
Combine GNSS, LiDAR, cameras and IMU for point surveying and spatial capture.
Stay connected in the field
Built-in UHF, 4G, Wi-Fi, Bluetooth and NFC support flexible survey workflows.
Continue into GNSS-limited areas
SureFix supports pole measurements near obstructed areas, with typical ±5 cm accuracy within a 20 m radius.
Capture tunnels and cross-sections
Record surfaces for cross-section checks and volume calculations across engineering projects.
Survey earthworks and stockpiles
Capture terrain and volumes with on-site results through FJD Trion Survey.
The FJD Trion V100F combines professional GNSS surveying, 3D LiDAR scanning, cameras and IMU technology in one field system. It is designed to continue spatial capture as conditions move between open GNSS environments and obstructed or GNSS-limited areas.
Key specifications
- Multi-constellation GNSS
- LiDAR range: 40 m at 10% reflectivity; 60 m at 80% reflectivity
- 360° horizontal × 62° vertical LiDAR field of view
- RTK: H 8 mm + 1 ppm RMS; V 15 mm + 1 ppm RMS
- PPK: H 3 mm + 1 ppm RMS; V 5 mm + 1 ppm RMS
- Typical LiDAR survey accuracy: ±5 cm at 20 m
- 450 GB internal storage
- IP65; IK08
- 1.75 kg
Typical applications
Roads, bridges, tunnels, utility trenches, mining, earthworks, stockpiles, cross-sections and projects where survey positioning and spatial capture need to continue through changing GNSS conditions.
Frequently asked questions
What is the FJD Trion V100F?
An integrated survey system combining GNSS, LiDAR, cameras and IMU for point surveying and georeferenced spatial capture.
Does V100F support RTK and PPK?
Yes. FJD specifies RTK and PPK modes as well as static and post-processed static surveying.
What is the V100F LiDAR range?
FJD specifies 40 m at 10% reflectivity and 60 m at 80% reflectivity.
Where is V100F particularly useful?
It is designed for complex engineering and surveying environments including urban canyons, bridges, tunnels, roads, trenches, mining and earthworks.
Can V100F work where GNSS visibility is limited?
The integrated LiDAR, camera and IMU workflow is specifically designed to extend capture into obstructed and GNSS-limited areas while maintaining a connected field workflow.
Compare the FJD Trion range
Not sure which system best fits your work? Use our FJD Trion LiDAR Scanner Comparison Guide 2026. For building workflows, see LiDAR scanners for architects and measured building surveys and our Scan-to-BIM, Revit & ArchiCAD guide.
